Makita BHR200SJEP Battery

Image Product Today's Price
24V battery For MAKITA BH2433 3300mAh cordless BHP460 BHR200 BH2430 BTD200 24V battery For MAKITA BH2433 3300mAh cordless BHP460 BHR200 BH2430 BTD200
We offfer 1 Year Warranty for this Makita BHR200SJEP Battery . Item will be sent out from UK Local warehouse with trackable fast shipping. See more detail: view product buy product

How to store a Makita BHR200SJEP Battery

Store your Makita BHR200SJEP Battery in a dry, cool location. When choosing a location to store your batteries, make sure it is not subjected to extremes of temperature or humidity, as these conditions can damage the battery.

Store rechargeable Makita BHR200SJEP Battery at a 40 percent charge. Rechargeable batteries with a lithium or nickel chemistry should be stored at around a 40 percent charge. This minimizes degradation due to age, while still allowing the battery to slowly discharge itself, which is crucial for its operational health.

Recharge Stored Makita BHR200SJEP Battery At Least Once a Month. As we know, the chemicals inside battery react, causing it to self-discharge. Depending on battery type and temperature, the rate of self-discharge varies. Top off the charge monthly to lengthen its service life. A fully discharged battery is more likely than a fully charged battery to freeze when the temperature drops below zero.

DO keep the Makita BHR200SJEP Battery contact surfaces clean by gently rubbing with a clean pencil eraser, cloth or rubbing alcohol. Dirty contact points are a primary source of charging challenges.

Makita BHR200SJEP Battery Related Tips
  • Lithium-Ion / Li-ion Cordless Tools Batteries Features

          Lithium-ion (Also called Li-ion) is a family of rechargeable battery types boasting one of the best energy densities, no memory effect, and a slow loss of charge when not in use. Because of these features, the Li-ion battery powered cordless tools are designed more and more.

    Let us know more about these features.

    No Memory Effect

    Memory effect is the problem that (it's alleged) nickel cadmium rechargeable has whereby they hold less and less charge, depending on use. For example, if a ni-cad battery is not fully discharged, the theory goes that the battery "remembers" that it's got a smaller capacity for charge than the manufacturer intended.

    This means, after charge–by-charger, the ni-cad battery will be less and less efficient.

    More lighter

    For example, a Li-ion 18V 3.0Ah Makita BL1830 battery is about 650 g, but a Ni-MH 18V 3.0Ah Bosch BAT026 is 1200 g, In the same voltage and capacity, the Ni-MH battery is nearly twice of the weight of the Li-ion battery.

    This is great when you are using a cordless power tools above shoulder height for any length of time.

    High energy density

    The energy density of lithium-ion is typically twice that of the standard nickel-cadmium. There is potential for higher energy densities. The load characteristics are reasonably good and behave similarly to nickel-cadmium in terms of discharge. The high cell voltage of 3.6 volts allows battery pack designs with only one cell. Most of today's mobile phones run on a single cell. A nickel-based pack would require three 1.2-volt cells connected in series.

    Low Self-discharge rate:

    A lithium-ion cell is that their rate of self-discharge is much lower than that of other rechargeable cells such as Ni-Cad and Ni-MH forms. You do not need to charge it again after a long time of use, this can save time when you have something urgent to do.
    Post Dated: 2014-07-02  
A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9 |

Trusted Site Seal

Our Advantages:

High Quality + Low Price + Fast Shipping + 100% Satisfaction Guarantee, We Are Your Best Choice of Handheld Cleaner Battery and Power Tool Battery Supplier in UK!